Search Results




Removal & Installation:
Bosch Speed Sensor









Before you start

In most cases you'll need to gain access to the speed sensor connections. To do so follow our other videos, this will include removing the non-drive side crank with a crank puller & outer motor casing to gain access to the speed sensor connection.



Removal

Important: Make sure your eBike is firmly supported and the battery is removed from the bike before you proceed.

Tools Required: Snips, Pliers, Torx T20 & Philips Screwdriver.

Time: Approx 5 minutes (with drive unit removed).


Installation

Important: Make sure your eBike is firmly supported and the battery is removed from the bike before you proceed.

Tools Required: Snips, Pliers, Torx T20 & Philips Screwdriver.

Time: Approx 5 minutes (with drive unit removed).


These support pages are meant as a guide only and in no way will The UK Electric Bike Company accept liability for any damages that may be incurred by following the support instructions. Users proceed with caution and at the risk of the operator.