Search Results




Removal & Installation:
Bosch eBike Purion Display









Before you start

You'll need to secure the bike firmly so you can work on it with ease. You'll also need to remove the drive unit or at least drop it down to gain access to the bottom connection for the Purion into the Bosch drive unit.



Removal

Important: Make sure your eBike is firmly supported and the battery is removed from the bike before you proceed.

Tools Required: 3mm Allen Key & Cable Pull.

Time: Approx 15 minutes (with drive unit already removed).


Installation

Important: Make sure your eBike is firmly supported and the battery is removed from the bike before you proceed.

Tools Required: 3mm Allen Key & Cable Pull.

Time: Approx 15 minutes (with drive unit already removed).


These support pages are meant as a guide only and in no way will The UK Electric Bike Company accept liability for any damages that may be incurred by following the support instructions. Users proceed with caution and at the risk of the operator.