Bosch E-Bike Parts

Bosch Active / Performance / CX Motor Drive Sprockets

Name: Bosch Active / Performance / CX Motor Drive Sprockets
Brand: Bosch E-Bike Parts
SKU: MR1014
Price: 14.99 GBP
Availability: InStock

£14.99

In stock

Bosch Sprocket Size: 14t

14t 15t 16t 17t 18t 19t 20t 21t 22t

Bosch E-Bike Parts Bosch Active / Performance / CX Motor Drive Sprockets

£14.99

Finally an option to customise the gearing of your Bosch powered eBike. These sprockets are available for the Bosch Active / Performance Line / CX Motor Drive Units. These sprockets are made out of a special Carburized Steel, so should last longer than most standard sprockets.

Most UK sellers will only have access to 15t, 18t & 20t sprockets. Here exclusively at e-bikeshop & for the the first time ever we offer the option of any size possible, so you have full flexibility of gearing!

We offer these Bosch sprockets in 14, 15, 16, 17, 18, 19, 20, 21 & 22 teeth sizes!

As a general reference, if you increase sprocket size the cadence will become slower (harder to pedal / faster). By decreasing sprocket size the cadence will become higher (easier to pedal / lighter for hill climbing). Generally most eMTB's come as standard with 14-18t sprockets and road / trekking bikes come as standard with 16-20t.

Please Note: This sprocket will not work with certain models with a 27.5+ rear wheel as the inner plate has a 8mm offset. This is also applicable to most 27.5+ bikes, due to the extra spacing for plus tyres. Please contact your dealer for these OEM specific parts. If you purchased your bike from us, please find the part here.

You will also require the Bosch Active / Performance Lock ring tool & the Bosch crank puller to remove the existing sprocket. Available from our store.

It's always advisable to use new sprockets with a new chain when replacing. The old chain could slip over the new sprocket please find chains here.

This sprocket is not for the Classic+ Bosch eBike motor.

Great parts

The part came and it was exactly what I needed the only drawback was how long it took to arrive

Did the job

Took me 10 minutes to fit and re-assemble the drive. Works perfectly.

Good quality sprocket

Great quality sprocket
Good tight fit on the splined shaft
My bike (Diamondback Lux with Bosch CX drive) did need a spacer so I ground the teeth off the old sprocket and used that

Chain sprocket

The sprocket fitted, although, it not the same as the original. As the original had a shoulder on the inner side , helping with chain alignment.
I fabricated a spacer ring and everything was good.
Not a bad price, though, shipping fee, almost added 50% to the overall cost!
Delivery was also later than estimated.
Overall solved the problem.